
<p>Setting up a TP-Link wireless range extender is an amazing option to consider if you want to gain access to a blazing-fast and lag-free internet connection. Performing <strong><a href="https://tp-linkrepeatersetup.com/tp-link-extender-setup/">TP Link extender setup</a></strong> will transmit the signals of your existing WiFi network throughout your home. But, what if your extender refuses to connect to the router? Will it be of any good?</p>



<p>Well, we can guess the answer to that question. That is why we have written this post. Here, we have talked about various troubleshooting hacks that will help you get rid of the issue at hand. Thus, let’s set the ball rolling.</p>



<p><strong>Fixed: TP-Link Extender Not Connecting to Router</strong></p>



<p><strong>Reboot Your TP-Link Extender</strong></p>



<p>Technical glitches are one of the biggest reasons why your TP-Link wireless range extender is not connecting to the router. To get rid of these glitches, you need to reboot your WiFi device. Here is how you can do that:</p>



<ul class="wp-block-list"><li>Power off your TP-Link extender and unplug it from the wall socket.</li><li>Hold on your horses.</li><li>Thereafter, plug your TP-Link extender back into its wall socket and turn it on.</li></ul>



<p>Now, try to connect your extender to the router and access <strong><a href="https://tp-linkrepeatersetup.com/">tplinkrepeater.net</a></strong>. Any luck with the situation? If not, continue reading this article.</p>



<p><strong>Verify the Ethernet Connection</strong></p>



<p>There is a possibility that the Ethernet cable you have used to connect your TP-Link wireless range extender to the router is worn out.</p>



<p>To troubleshoot the issue, we recommend that you get your cable replaced with a new one. If you don’t feel like wasting your money, consider connecting your devices with the help of a wireless source.</p>



<p><strong>Bring Your Devices Closer</strong></p>



<p>Apart from ensuring a strong connection between your TP-Link wireless range extender and router, also see that the distance between them is not too much.</p>



<p>If you have placed your extender in a different room, change that right away. Instead, keep your extender in close proximity to your home router.</p>



<p><strong>Avoid Signal Interference</strong></p>



<p>If the signals of your either of your devices are getting interrupted, then also you can face the TP-Link extender not connecting to router issue.</p>



<p>Thus, relocate your extender and router and make sure that they are not placed anywhere near mirrors, fish tanks, cordless phones, washing machines, baby monitors, Bluetooth speakers, refrigerators, microwave ovens, treadmills, televisions, aluminum studs, corners, concrete walls, and utensils containing water.</p>



<p><strong>Update Firmware</strong></p>



<p>Another way through which you can troubleshoot the TP-Link wireless range extender not connecting to router issue is by updating the extender’s firmware.</p>



<p>Performing TP-Link firmware update is not that difficult. However, if you need help to perform the process, refer to the guidelines given in the user manual.</p>



<p><strong>Reset and Reconfigure</strong></p>



<p>An improper setup can also stop your TP-Link wireless range extender from connecting to your home router. Thus, reconfigure your device. But, before you do that, you need to perform factory default reset.</p>



<p>Follow the instructions mentioned below in order to restore your TP-Link extender to the factory default settings:</p>



<ul class="wp-block-list"><li>Look at all sides of your WiFi range extender and locate the Reset hole.</li><li>Once found, take an oil pin or paper clip and carefully insert it in the Reset hole.</li><li>Wait for a couple of seconds.</li></ul>



<p>In some time, your TP-Link range extender will get restored to the factory default mode. Now, you can reinstall your device.</p>



<p><strong>Note: </strong>Whether you have performed <strong><a href="https://tp-linkrepeatersetup.com/tp-link-ac750-setup/">TP Link AC750 setup</a> </strong>or installed any other extender model in your home, the reset process will remain same.</p>



<p><strong>Conclusion</strong></p>



<p>With the help of the aforementioned troubleshooting hacks, you will surely be able to resolve the TP-Link extender not connecting to router issue.</p>



<p>To your knowledge, if there is another way through which you can get rid of this issue, do share it with your fellow readers via the comment section.</p>

My TP-Link Extender Is Not Connecting To Router. What to Do?
TP-Link Product Pics