Procedure to install Netgear EX3700 Range extender using

Netgear EX3700

The Netgear AC750 dual-band repeater extends the range of your present WiFi network while providing speeds of up to 750Mbps. It is equipped with internal antennae as well as greater amplifiers, which allow you to extend the network’s coverage across the entire house. Because it makes use of FastLane technology, the AC750 WiFi repeater (EX3700) improves WiFi performance across both frequency bands. It is great for high-definition streaming and gameplay, and it is compatible with any standard router.

Before you begin configuring your Netgear WiFi repeater, you should download the WiFi Analytics application. Test the signal strength across the house with the help of the app. As a result, you may come across areas with inadequate WiFi coverage. After you have completed the Netgear EX3700 setup, launch the app and test the wifi signal to see how much your WiFi coverage has increased since you began.

With that said, without further ado, please see below the procedure for configuring the AC750 Netgear WiFi extender model EX3700. Let’s get this party started.

How to Install and Configure the Netgear EX3700 Extender

To install and configure a Netgear extender, you must go to the default Netgear web address,, which is accessible through a web browser. Let’s take a brief look at the whole installation procedure for the AC750, which is listed below:

Take your Extender out of the package.

First and foremost, make ensuring that your EX3700 extender is correctly unboxed. All of your extender’s LED lights are positioned on the front panel, and the buttons are situated on the side panel of the device. The Netgear extender functions as a link between your current router as well as a WiFi device that is outside of the range of your current router’s WiFi signal.

Insert the EX3700 and press “Apply” Power

Install your Netgear EX3700 repeater in a prominent spot in your home at this point in time. Please avoid placing this item close to any of the following items: concrete walls, microwave, electric water tanks, treadmill, vacuum cleaner, mirrors, glassware, corners, air conditioning and refrigerators. Having placed the extender in its proper location, connect into an electrical socket and turn it on. Additionally, always use a range extender with a functioning wall socket and a power source that is free of fluctuations.

Connect to a wireless network (Wi-Fi).

In the following step, you will establish connections among your repeater and a Wifi connection. Select a WiFi network and hit on the connect button to connect to it. If your network is protected, it will prompt you to provide a password before allowing you to join your repeater to it.

having Access the Netgear Installation Assistant Turn on your computer or laptop and make sure it is connected to a wireless network. Start by loading a web browser of your choice and going to the repeater login page. To log in, you must enter your login credentials. The Netgear installation assistant appears on your desktop screen after you have successfully joined in.

Install and configure your Netgear AC750 – EX3700 Extender.

The installation help is referred to as the Netgear Genie smart installation wizard on the manufacturer’s website. Netgear EX3700 setup instructions are displayed on screen in a step-by-step format. All you have to do is follow their instructions to the letter.

And you’re finished! Your Netgear EX3700 AC750 WiFi booster has now been successfully installed and configured.

Find the Most Appropriate Location

After you have installed your range extender, you can relocate it to any area you like. Now connect the extender then wait for the router Indicator to illuminate before proceeding. Make use of this LED light to determine the most optimal position for your WiFi booster. Continue to move it till the Light comes visible in the green colour spectrum.

Link all of your devices, including your computer, laptop, and smartphone, to the new expanded wireless network from this point on.

Create a configuration for your EX3700 Following the Initial Setup

You should now be able to make changes to the configuration of your EX3700 repeater. Change the settings by going to the setup page and making the changes you want. Upon logging in, a dashboard will appear, from which you can disable the SSID broadcast function, view the devices that are currently connected to your network, create a hidden network, redesign the WiFi network name, set up an internal schedule, change the WiFi speed, and perform a variety of other tasks.

This concludes our comprehensive tutorial to Netgear EX3700 installation and settings. Keep checking back with us for more developments like this one!

Like it? Share with your friends!


What's Your Reaction?

hate hate
confused confused
fail fail
fun fun
geeky geeky
love love
lol lol
omg omg
win win
BSV Staff

Every day we create distinctive, world-class content which inform, educate and entertain millions of people across the globe.